The Unidryer Series

Compact and mobile IR dryer ideal for R&D, testing, sampling, expos and events 

Unit belt width:66.1cm

Unit length: 142.2cm 

Heater width approx. 51cm, chamber length 45.7cm 

Standard features of the range: 

• Hot and cold areas are eliminated via a dense coil design, heater shields, and a 6.35 watt per sq-in infrared heater. 
• 15-year heater warranty. 
•  2050 Watt heater, max 399 Celsius output. 
• Teflon coated fiberglass belt with tracking system. 
• Using lock knobs on the sides of the heating chamber, the heater may be raised, lowered, and pivoted. 2–7-inch adjustment/ 5-17.7cm  
• Ultra-compact only takes up approx. 1.2m2 of space, can be table mounted and doesn’t necessarily need a van to transport.

Optional Model variations: 

• There is also a smaller option for those with even less available space, namely the IR100Mini:
• Overall shorter at 117cm 
• Narrower belt width (45.7cm) 
• Smaller narrower (1625 Watts) heater
• There are further scale up units we could offer if you budget sits somewhere between the small scale IR100 Series and our standard industrial IR330 Series, please contact our R&D team for further information 

Standard features of the range: 

• Dual chamber curing unit 2x137cm long infrared emitter array  
• Includes 3 infrared heaters per 137cm long chamber 
• Powerful focused exhaust system and filtered air intake remove moisture rapidly, providing contamination-free air for optimum curing 
• Temperature controller accurate to +/-0.5°C, allowing fine-tuning and replicable drying results. 
• Infrared Focusing System allows 5-17.7 cm belt-to-heater height adjustment for increased curing flexibility.
• Heavy duty motor upgrade (SHD) for boosted line speed and working efficiency.
• Tightened/strengthened Kevlar Belt (higher heat resistance)
• Additional Emergency stop buttons
• Premium (4300 Watts) HI-IR emitters with boosted temperature performance of up to 545 Celsius.
• Digital belt speed display and a belt tracking system for increased belt life.
• Heavy duty levellers for flexible height adjustment
• Cool down bar for optimum drying and stacking of coated timber.
• Heavy duty conveyor belt tracking systems.
• 15-year heater warranty 

Optional Extras: 

• Modular Infrared chambers for increased working speeds. 
• Exhaust hood for extra vapour extraction. 
• Side mounted emitters for optimum curing of timber coated on all 3 sides. 

Optional Model variations: 

• It is possible to order a single chamber version of all the above models at a sizeable discount. 
• Chamber length is cut down to one single chamber of 137cm in length. 
• The drawback to this is significantly reduced drying and conveyor speeds.

Standard features of the range: 

• Most powerful units in our range 
• Dual chamber curing unit 2x137cm long infrared emitter array 
• Includes 4 infrared heaters per 137cm long chamber, featuring a high-powered pre-heating zone that surges coating temperatures past 300°F (149°C) within the first several inches/centimetres of conveyor travel, maximizing dwell time at optimum curing temperatures and, in turn, conveyor belt speeds and dryer output.
• Side mounted emitters allow for optimum curing of timber coated on all 3 sides and also for an increased effective curing zone.
• Air intake fans located below the roof of the enclosure quietly draw ‘make-up’ air into the chamber’s double-walled shell through filtered inlets along opposite exterior sides at rates up to 560 cfm (15.6 m3/min), serving to cool the outer shell for safety, while preheating the incoming air.
• An exhaust fan located below the centre of the conveyor belt draws the preheated air downward at rates up to 900 cfm (25.5 m3/min), over the timber and through the belt, removing heat, moisture and contaminants from the chamber.
• Operators are made aware of blocked exhaust lines, clogged filters, or failing blowers by exhaust flow sensors with warning lights. A light tower to monitor the status of the dryer and a “cool down mode” for shutting down the appliance are also additional safety features.
• Temperature controller accurate to +/-0.5°C, allowing fine-tuning and replicable drying results.
• Infrared Focusing System allows 10.16-17.7 cm belt-to-heater height adjustment for increased curing flexibility.
• Heavy duty motor upgrade (SHD) for boosted line speed and working efficiency.
• Tightened/strengthened Kevlar Belt (higher heat resistance)
• Additional Emergency stop buttons
• Premium (4300 Watts) HI-IR emitters with boosted temperature performance of up to 545 Celsius.
• Digital belt speed display and a belt tracking system for increased belt life.
• Heavy duty levellers for flexible height adjustment
• Cool down bar for optimum drying and stacking of coated timber.
• Heavy duty conveyor belt tracking systems.
• 15-year heater warranty  

Optional Model variations: 

• It is possible to order a single chamber version of all the above models at a sizeable discount. 
• Chamber length is cut down to one single chamber of 137cm in length. 
• The drawback to this is significantly reduced drying and conveyor speeds.

Based upon our learnings from the IR1500-IR3000 range, we have created a handheld curing system so all can get involved in the benefits of accelerated drying.
Modified for optimum evaporation of water.
HI-IR Fast Response lamp technology provides fast, safe and efficient drying results.
Optimised for Rubio Monocoat Wood Cream and proudly made in Australia.
Wavelength selection mitigates surface damage to the coating.
In partnership with Australia’s leading Infrared lamp supplier, over 30 years in the industry.
Shipping worldwide

Standard features: 

• • Dimensions: 400x120x100mm
  • HI-IR Fast Response Lamp
  • Gold reflector
  • Long lifespan
  • Material: Aluminium/stainless steel (AS304)
  • Power up to 1500W at 240VAC
  • Voltage 240VAC, 10-amp single phase supply
  • Internal over temperature sensor
  • Cooling fan
  • Heat Output control via power controller with potentiometer

Optional Model variations: 

• Extra quartz lamp can be added to drying unit to increase the drying field.
• 3-4kw power options also available